程序代写代做代考 interpreter concurrency Assignment 1: A Unix Shell
Assignment 1: A Unix Shell
Assignment 1: The Unix Shell
Objectives
There are three objectives to this assignment:
To familiarize yourself with the Linux programming environment.
To learn how processes are created, destroyed, and managed.
To gain exposure to the necessary functionality in shells.
Overview
In this assignment, you will implement a command line interpreter or, as it is
more commonly known, a shell. The shell should operate in this basic way: when
you type in a command (in response to its prompt), the shell creates a child process
that executes the command you entered and then prompts for more user input when
it has finished.
The shells you implement will be similar to, but simpler than, the one you run every
day in Unix. You can find out which shell you are running by typing “echo
$SHELL” at a prompt. You may then wish to look at the man pages for csh or the
shell you are running (more likely tcsh or bash , or for those few wacky ones in the
crowd, zsh or ksh or even fish ) to learn more about all of the functionality that
can be present. For this project, you do not need to implement too much
functionality.
Program Specifications
Basic Shell
Your basic shell is basically an interactive loop: it repeatedly prints a prompt
“mysh> ” (note the space after the percent sign), parses the input, executes the
command specified on that line of input, and waits for the command to finish. This
is repeated until the user types “exit”. The name of your final executable should be
mysh :
prompt> ./mysh
mysh>
You should structure your shell such that it creates a new process for each new
command (there are a few exceptions to this, which we will discuss below). There
are two advantages of creating a new process. First, it protects the main shell
process from any errors that occur in the new command. Second, it allows for
concurrency; that is, multiple commands can be started and allowed to execute
simultaneously.
Your basic shell should be able to parse a command, and run the program
刘猛
corresponding to the command. For example, if the user types “ls -la /tmp” ,
your shell should run the program ls with all the given arguments and print the
output on the screen.
Note that the shell itself does not “implement” ls or really many other commands at
all. All it does is find those executables and create a new process to run them. More
on this below.
The maximum length of a line of input to the shell is 512 bytes (excluding the
carriage return).
Built-in Commands
Whenever your shell accepts a command, it should check whether the command is a
built-in command or not. If it is, it should not be executed like other programs.
Instead, your shell will invoke your implementation of the built-in command. For
example, to implement the exit built-in command, you simply call exit(0); in
your C program.
So far, you have added your own exit built-in command. Most Unix shells have
many others such as cd , echo , pwd , etc. In this project, you should implement cd ,
pwd , and wait (the latter of which is described further below, under background
jobs).
exit, cd, and pwd formats. The formats for exit , cd and pwd are:
[optionalSpace]exit[optionalSpace]
[optionalSpace]pwd[optionalSpace]
[optionalSpace]cd[optionalSpace]
[optionalSpace]cd[oneOrMoreSpace]dir[optionalSpace]
[optionalSpace]wait[optionalSpace]
When you run “cd” (without arguments), your shell should change the working
directory to the path stored in the $HOME environment variable. Use
getenv(“HOME”) to obtain this.
You do not have to support tilde (~). Although in a typical Unix shell you could go
to a user’s directory by typing “cd ~username”, in this project you do not have to
deal with tilde. You should treat it like a common character, i.e. you should just pass
the whole word (e.g. “~username”) to chdir(), and chdir will return error.
Basically, when a user types pwd, you simply call getcwd(). When a user changes
the current working directory (e.g. “cd somepath”), you simply call chdir(). Hence,
if you run your shell, and then run pwd, it should look like this:
% cd
% pwd
/home/username
% echo $PWD
/home/username
刘猛
刘猛
刘猛
刘猛
% ./mysh
mysh> pwd
/home/username
Redirection
Many times, a shell user prefers to send the output of his/her program to a file rather
than to the screen. The shell provides this nice feature with the “>” character.
Formally this is named as redirection of standard output. To make your shell users
happy, your shell should also include this feature.
For example, if a user types “ls -la /tmp > output” , nothing should be printed
on the screen. Instead, the output of the ls program should be rerouted to the
output file.
If the “output” file already exists before you run your program, you should simple
overwrite the file (after truncating it). If the output file is not specified (e.g. “ls > ”
), you should also print an error message.
Here are some redirections that should not work:
ls > out1 out2
ls > out1 out2 out3
ls > out1 > out2
Background Jobs
Sometimes, when using a shell, you want to be able to run multiple jobs
concurrently. In most shells, this is implemented by letting you put a job in the
“background”. This is done as follows:
mysh> ls &
By typing a trailing ampersand, the shell knows you just want to launch the job, but
not to wait for it to complete. Thus, you can start more than one job by repeatedly
using the trailing ampersand.
mysh> ls &
mysh> ps &
mysh> find . -name *.c -print &
Of course, sometimes you will want to wait for jobs to complete. To do this, in your
shell you will simply type wait . The built-in command wait should not return until
all background jobs are complete. In this example, wait will not return until the
three jobs (ls, ps, find) all are finished.
刘猛
刘猛
刘猛
mysh> ls &
mysh> ps &
mysh> find . -name *.c -print &
mysh> wait
History
Add a history feature to your shell. The history feature allows the user to access the
most recently entered commands The user will be able to access up to 10 commands
by using the history feature. Commands entered into the shell will be consecutively
numbered starting at 1, and the numbering will continue past 10
The user will be able to list the command history by entering the command
history
at the mysh prompt
Your shell should support two techniques for retrieving commands from the
command history:
When the user enters !!, the most recent command in the history is executed
When the user enters a signle ! followed by an integer N, the Nth command in
the history is executed
Program Errors
The one and only error message. A section about the Error Message has been
added. In summary, you should print this one and only error message whenever you
encounter an error of any type:
char error_message[30] = “An error has occurred
”;
write(STDERR_FILENO, error_message, strlen(error_message));
The error message should be printed to stderr (standard error). Also, do not add
whitespaces or tabs or extra error messages.
There is a difference between errors that your shell catches and those that the
program catches. Your shell should catch all the syntax errors specified in this
project page. If the syntax of the command looks perfect, you simply run the
specified program. If there is any program-related errors (e.g. invalid arguments to
ls when you run it, for example), let the program prints its specific error messages
in any manner it desires (e.g. could be stdout or stderr).
White Spaces
Zero or more spaces can exist between a command and the shell special characters
(i.e. “>” ). All of these examples are correct.
刘猛
刘猛
刘猛
刘猛
mysh> ls
mysh> ls > a
mysh> ls>a
Batch Mode
So far, you have run the shell in interactive mode. Most of the time, testing your
shell in interactive mode is time-consuming. To make testing much faster, your shell
should support batch mode .
In interactive mode, you display a prompt and the user of the shell will type in one
or more commands at the prompt. In batch mode, your shell is started by specifying
a batch file on its command line; the batch file contains the same list of commands
as you would have typed in the interactive mode.
In batch mode, you should not display a prompt. You should print each line you
read from the batch file back to the user before executing it; this will help you when
you debug your shells (and us when we test your programs). To print the command
line, do not use printf because printf will buffer the string in the C library and will
not work as expected when you perform automated testing. To print the command
line, use write(STDOUT_FILENO, …) this way:
write(STDOUT_FILENO, cmdline, strlen(cmdline));
In both interactive and batch mode, your shell should terminates when it sees the
exit command on a line or reaches the end of the input stream (i.e., the end of the
batch file).
To run the batch mode, your C program must be invoked exactly as follows: mysh
[batchFile]
The command line arguments to your shell are to be interpreted as follows.
batchFile: an optional argument (often indicated by square brackets as
above). If present, your shell will read each line of the batchFile for
commands to be executed. If not present or readable, you should print
the one and only error message (see Error Message section below).
Implementing the batch mode should be very straightforward if your shell code is
nicely structured. The batch file basically contains the same exact lines that you
would have typed interactively in your shell. For example, if in the interactive
mode, you test your program with these inputs:
emperor1% ./mysh
mysh> ls
some output printed here
mysh> ls > /tmp/ls-out
刘猛
刘猛
刘猛
some output printed here
mysh> notACommand
some error printed here
then you could cut your testing time by putting the same input lines to a batch file
(for example myBatchFile):
ls
ls > /tmp/ls-out
notACommand
and run your shell in batch mode:
prompt> ./mysh myBatchFile
In this example, the output of the batch mode should look like this:
ls
some output printed here
ls > /tmp/ls-out
some output printed here
notACommand
some error printed here
Important Note: To automate grading, we will heavily use the batch mode . If
you do everything correctly except the batch mode, you could be in trouble. Hence,
make sure you can read and run the commands in the batch file. Soon, we will
provide some batch files for you to test your program.
Defensive Programming and Error Messages
Defensive programming is required. Your program should check all parameters,
error-codes, etc. before it trusts them. In general, there should be no circumstances
in which your C program will core dump, hang indefinitely, or prematurely
terminate. Therefore, your program must respond to all input in a reasonable
manner; by “reasonable”, we mean print the error message (as specified in the next
paragraph) and either continue processing or exit, depending upon the situation.
Since your code will be graded with automated testing, you should print this
one and only error message whenever you encounter an error of any type:
char error_message[30] = “An error has occurred
”;
write(STDERR_FILENO, error_message, strlen(error_message));
刘猛
For this project, the error message should be printed to stderr Also, do not
attempt to add whitespaces or tabs or extra error messages.
You should consider the following situations as errors; in each case, your shell
should print the error message to stderr and exit gracefully:
An incorrect number of command line arguments to your shell program.
For the following situation, you should print the error message to stderr and
continue processing:
A command does not exist or cannot be executed.
A very long command line (over 512 characters, excluding the carriage
return)
Your shell should also be able to handle the following scenarios below, which are
not errors . A reasonable way to check if something is not an error is to run the
command line in the real Unix shell.
An empty command line.
Multiple white spaces on a command line.
All of these requirements will be tested extensively.
Hints
Writing your shell in a simple manner is a matter of finding the relevant library
routines and calling them properly. To simplify things for you in this assignment,
we will suggest a few library routines you may want to use to make your coding
easier. (Do not expect this detailed of advice for future assignments!) You are free to
use these routines if you want or to disregard our suggestions. To find information
on these library routines, look at the manual pages (using the Unix command man ).
Basic Shell
Parsing: For reading lines of input, you may want to look at fgets(). To open a file
and get a handle with type FILE * , look into fopen(). Be sure to check the return
code of these routines for errors! (If you see an error, the routine perror() is useful
for displaying the problem. But do not print the error message from perror() to the
screen. You should only print the one and only error message that we have specified
above ). You may find the strtok() routine useful for parsing the command line (i.e.,
for extracting the arguments within a command separated by whitespace or a tab or
…). Some have found strchr() useful as well.
Executing Commands: Look into fork , execvp , and wait/waitpid . See the
UNIX man pages for these functions, and also read the Advance Programming in
the UNIX Environment, Chapter 8 (specifically, 8.1, 8.2, 8.3, 8.6, 8.10). Before
starting this project, you should definitely play around with these functions.
You will note that there are a variety of commands in the exec family; for this
刘猛
project, you must use execvp . You should not use the system() call to run a
command. Remember that if execvp() is successful, it will not return; if it does
return, there was an error (e.g., the command does not exist). The most challenging
part is getting the arguments correctly specified. The first argument specifies the
program that should be executed, with the full path specified; this is straight-
forward. The second argument, char *argv[] matches those that the program sees
in its function prototype:
int main(int argc, char *argv[]);
Note that this argument is an array of strings, or an array of pointers to characters.
For example, if you invoke a program with:
foo 205 535
then argv[0] = “foo”, argv[1] = “205” and argv[2] = “535”.
Important: the list of arguments must be terminated with a NULL pointer; that is,
argv[3] = NULL. We strongly recommend that you carefully check that you are
constructing this array correctly!
Built-in Commands
For the exit built-in command, you should simply call ‘exit();’. The corresponding
process will exit, and the parent (i.e. your shell) will be notified.
For managing the current working directory, you should use getenv , chdir , and
getcwd . The getenv() call is useful when you want to go to your HOME directory.
You do not have to manage the PWD environment variable. getcwd() system
call is useful to know the current working directory; i.e. if a user types pwd, you
simply call getcwd(). And finally, chdir is useful for moving directories. Fore more,
read the Advanced UNIX Programming book Chapter 4.22 and 7.9 .
Redirection
Redirection is relatively easy to implement: just use close() on stdout and then
open() on a file. More on this during discussion.
With file descriptor, you can perform read and write to a file. Maybe in your life so
far, you have only used fopen() , fread() , and fwrite() for reading and writing to a
file. Unfortunately, these functions work on FILE* , which is more of a C library
support; the file descriptors are hidden.
To work on a file descriptor, you should use open() , read() , and write() system
calls. These functions perform their work by using file descriptors. To understand
more about file I/O and file descriptors you should read the Advanced UNIX
Programming book Section 3 (specifically, 3.2 to 3.5, 3.7, 3.8, and 3.12). Before
reading forward, at this point, you should get yourself familiar with file descriptor.
The idea of redirection is to make the stdout descriptor point to your output file
descriptor. First of all, let’s understand the STDOUT_FILENO file descriptor. When
刘猛
刘猛
刘猛
刘猛
a command “ls -la /tmp” runs, the ls program prints its output to the screen. But
obviously, the ls program does not know what a screen is. All it knows is that the
screen is basically pointed by the STDOUT_FILENO file descriptor. In other words,
you could rewrite printf(“hi”) in this way: write(STDOUT_FILENO, “hi”, 2) .
Miscellaneous Hints
Remember to get the basic functionality of your shell working before worrying
about all of the error conditions and end cases. For example, first get a single
command running (probably first a command with no arguments, such as “ls”).
Then try adding more arguments.
Next, try working on multiple commands. Make sure that you are correctly handling
all of the cases where there is miscellaneous white space around commands or
missing commands. Finally, you add built-in commands and redirection suppors.
We strongly recommend that you check the return codes of all system calls from the
very beginning of your work. This will often catch errors in how you are invoking
these new system calls. And, it’s just good programming sense.
Beat up your own code! You are the best (and in this case, the only) tester of this
code. Throw lots of junk at it and make sure the shell behaves well. Good code
comes through testing — you must run all sorts of different tests to make sure things
work as desired. Don’t be gentle — other users certainly won’t be. Break it now so
we don’t have to break it later.
Keep versions of your code. More advanced programmers will use a source control
system such as CVS . Minimally, when you get a piece of functionality working,
make a copy of your .c file (perhaps a subdirectory with a version number, such as
v1, v2, etc.). By keeping older, working versions around, you can comfortably work
on adding new functionality, safe in the knowledge you can always go back to an
older, working version if need be.
Handin
To ensure that we compile your C correctly for the demo, you will need to create a
simple makefile; this way our scripts can just run make to compile your code with
the right libraries and flags. If you don’t know how to write a makefile, you might
want to look at the man pages for make or better yet, read the tutorial.
The name of your final executable should be mysh , i.e. your C program must be
invoked exactly as follows:
emperor1% ./mysh
emperor1% ./mysh inputTestFile
Copy all of your .c source files into the appropriate subdirectory. Do not submit any
.o files. Make sure that your code runs correctly your installed version of LTS Linux
http://www.csc.calpoly.edu/~dbutler/tutorials/winter96/cvs/
刘猛
Grading
We will run your program on a suite of test cases, some of which will exercise your
programs ability to correctly execute commands and some of which will test your
programs ability to catch error conditions. Be sure that you thoroughly exercise
your program’s capabilities on a wide range of test suites, so that you will not be
unpleasantly surprised when we run our tests.
