程序代写代做代考 algorithm ECS 30, Programming and Problem Solving Fall Quarter 2015
ECS 30, Programming and Problem Solving Fall Quarter 2015
Program Style
Computer programs are meant for two audiences: the computer that compiles and runs it, and the people who must
read, modify, or evaluate the program. In this course, the latter includes not only the instructor, teaching assistants,
and graders but also you a week after you wrote the code.
Most programming shops have “in-house standards” for programming style, because a standard style tends to make
programs more readable. ECS 30 is no exception; its rules are listed in this section. Part of your homework grade
reflects how well you meet these standards.
Underlying all style guides is one precept: use common sense. Remember that this style guide is only a guide.
You want to be suree that others can read and understand your program. If you think extra comments or a particular
program organization will make the program clearer, go for it. But be careful — what seems logical or clear to you
may not be logical or clear to others. So if you want to deviate too far from these guidelines, please talk to us.
1 Write Self-Documenting Code
“Self-documenting code” means that the program itself gives information about what it is doing. Some ways to do this
are:
• The structure of the program should reflect the way you would solve the problem naturally.
• Choose meaningful names for variables, functions, function arguments and parameters, and constants. For ex-
ample, a variable that stores an amount of money should be named something like amount or amountMoney, not
x.
• Use macros or const names to represent constant. Avoid sprinkling numbers throughout your code. This makes
changing the number easier — you change it once, where it is assigned a name or in the macro, rather than having
to find each time it occurs and changing each occurrence. A good rule of thumb is that, if a number appears more
than once in a program and means something special (like the size of an array or the maximum size of an input
number), name it and use the name, not the number.
• Avoid repeating code whenever possible. Use a function instead.
2 Capitalization of Names and Keywords
C is sensitive to capitalization; the variable names amountMoney and amountmoney refer to two different variables.
Keywords are never capitalized; it’s always while, never WHILE or while.
In general, variable names are in lowercase, the sole exception being if the name consists of more than one word.
In that case, you can either keep everything in lowercase, separate the words with an underscore ‘ ’ or capitalize the
first letter of each word (this last is sometimes called “camel case”). So, any of the variable names amountmoney,
amount money, amountMoney, or amount Money is fine. Pick the convention the convention that seems best to you.
But be consistent — use the same one throughout your program.
The names of macros, defined types, and named constants are entirely UPPERCASE. So the ratio of the circum-
ference of a circle to its diameter would be written as PI, not pi or PI.
3 Code Indentation and Formatting
A block of code refers to the statements between the open brace ‘{’ and the close brace ‘}’. After the opening brace,
indent the contents of the block by a consistent amount (usually 4–8 spaces or one horizontal tab). If there is a block
within a block, indent the inner block twice as much as the outer block. As an example:
int main(int argc, char *argv[])
{
int inpnumber;
int sum = 0;
int numread = 0;
while (scanf(“%d”, &inpnumber) == 1){
printf(“I read %d
”, inpnumber);
sum += inpnumber;
numread++;
}
Version of October 6, 2015 at 7:54am Page 1 of 4
ECS 30, Programming and Problem Solving Fall Quarter 2015
printf(“The sum of the %d numbers I read is %d
”, numread, sum);
return(0);
}
Also, note how the braces are placed. The first brace is always on a line before any statements in the block, but in
the above it may be on the same line as the while statement or on the line immediately after. In the latter case, line
it up with the beginning of the while:
while (scanf(“%d”, &inpnumber) == 1)
{
Again, be consistent. But you should always put the opening top-level brace (line the one under the line with main)
on a separate line.
Line up the closing brace with the beginning of the line containing the matching opening brace. The closing brace
always goes on its own line.
If a statement is split across multiple lines, indent the second and following lines an equal amount from the first
line:
printf(“this is a big print %d %s %d
”,
first_integer, first_string,
second_integer);
4 Exit Codes
When a C program terminates, it returns a value to its caller (usually but not always the shell). The code indicates how
the program terminated. If the exit code is 0, the program ran without error. If the exit code is not 0, then the program
is saying something happened — usually an error.
If you need to terminate your program within a function other than main, use the function exit(3). If you need to
do this in main, you can use either exit or return.
You can express an exit code in one of two ways.
• To indicate success, you can use either the integer 0 or the macro EXIT SUCCESS (and if you use the latter, don’t
forget to include the header file stdlib.h).
• To indicate a generic failure (that is, the program failed but you don’t want to indicate anything else), you can use
either the integer 1 or the macro EXIT FAILURE (again, if you use the latter, don’t forget to include the header
file stdlib.h). If you want to indicate which of several problems caused the failure, use an integer error code.
5 Comments
Comments should be used to make programs absolutely clear. Use them liberally but not so much that the meaning
gets submerged.
You should comment your code as you write it. It is actually much faster than going back later, and comments are
very useful when debugging. (If what the comment says the code does is different than what it really does, you found
a bug.) We reserve the right to refuse to look at uncommented programs.
ECS 30 “house standards” call for four kinds of comments:
• Start-of-file comments
• Start-of-function comments
• Paragraph comments
• Variable declaration comments
• Line comments
We will describe the requirements for each kind in turn.
5.1 Start-of-file comments
/*
* CHANGE — figure out how many quarters, dimes, nickels, pennies
* are in some amount of cash
*
* Usage: change
Version of October 6, 2015 at 7:54am Page 2 of 4
ECS 30, Programming and Problem Solving Fall Quarter 2015
*
* Inputs: User enters an integer for change
* Outputs: number of quarters, dimes, nickels, pennies in the change
* Exit Code: EXIT_SUCCESS (0) if valid integer entered
* EXIT_FAILURE (1) otherwise
*
* written for ECS 030, Fall 2015
*
* Matt Bishop, Oct. 1, 2015
* original program written
*/
The comments at the beginning of a file, collectively called its “header,” must contain your name in addition to
other general information about the program and what it does. The date when the program was written and a history
of major modifications are required.
5.2 Start of function comments
Each function must have its own header. Here’s an example for a function called take off queue:
/*
* take an element off the front of an existing queue
*
* parameters: QTICKET qno ticket for the queue involved (in)
* int *value value removed from the queue (out)
* (assumes it’s a valid int pointer
* but checked for NULL)
* returns: int 0 success!
* QE_BADPARAM bogus parameter because:
* * parameter refers to deleted, invalid,
* or unallocated queue
* * pointer points to NULL address for
* returned element
* QE_INTINCON queue is internally inconsistent
* QE_EMPTY no elements so none can be retrieved
* exceptions: none
*/
int take_off_queue(QTICKET qno)
{ … }
The reader should be able to determine what a function does and how to use it by reading only this header informa-
tion. Things like global variables referenced or modified, assumptions about the input, or anything else that the reader
should know before “lifting” a function and using it in another program should go here. So should the algorithm used,
if it’s not absolutely clear.
You also need to list the parameters to the function, their type, and what they mean. It’s also helpful to say whether
they contain information passed into the function (“in”), returned from the function (“out”), or both (“in/out”).
Then list the possible return values (if any) and say what they mean. In the above, the return value may be one of 4
values, three of which are macros defined elsewhere. The header states what each return value means. If the function
does not return a value, say “none” or “void” here.
Also note any unusual or exceptional conditions — for example, if the function handles messages from other
programs (these are called “interrupts” or “traps”. For this class, you simply need to include this and say “none”,
because we don’t think any programs or functions will have to handle these.
You should also state any input and output assertions. Input assertions is a fancy way of saying “I assume this about
the input.” For example, for a square root routine sqrt(x), the usual input assertion is x > 0. In the above, look at
the comment about “value”: “(assumes it’s a valid int pointer but checked for NULL)”. That’s an assertion, because it
says the function doesn’t check that “value” points to an integer. Output assertions are similar — they describe what
Version of October 6, 2015 at 7:54am Page 3 of 4
ECS 30, Programming and Problem Solving Fall Quarter 2015
is true after the function has been called. It is a good habit to get into writing these assertions. It helps you specify
exactly what the routine does, and this is precisely the information that someone needs to know in order to lift your
routine and use it elsewhere.
If you borrow code from another source, you must cite the author, where you got it from — a book or web site —
and any other information that will help another reader can find the reference.
5.3 Paragraph comments
When you write pseudo-code or describe how a function accomplishes its task you usually break it down into a series
of steps. For example, to insert an item into an array, you find where it belongs, move everything after it down one
place, and finally copy the item into the correct position. These steps sometimes become functions with descriptive
names, but often they become several lines of code. In this case, it helps to write a comment that explains the purpose
of the next section of code. For example, here is a segment of code that checks an error condition:
/*
* check that qno refers to an existing queue;
* readref sets the error code
*/
if ((cur = readref(qno)) != GOOD)
return(cur);
Paragraph comments are generally not necessary in short functions.
5.4 Variable declaration comments
These comments typically go at the end of a line. They explain what the variable is. Here’s an example, from the
take off queue function:
int cur; /* index of current queue */
QUEUE *q; /* pointer to current queue structure */
int index; /* index of element to be returned */
5.5 Line comments
These comments usually go at the end of a line. They explain what the line of code does, and are used when the
meaning of the line is not clear. Do not say what the line does; say why it is there. As an example:
q->queue[(q->head+q->count)%MAXELT] = n; /* append element to end of queue */
q->count++; /* one more element in the queue */
I prefer to put these comments above the lines, because it is easier (for me) to read:
/* append element to end of queue */
q->queue[(q->head+q->count)%MAXELT] = n;
/* one more element in the queue */
q->count++;
Both styles are widely used, so you should feel free to use whichever you like. But do not write this type of line
comment:
q->count++; /* add 1 to q->count */
This just translates the C into English. A useful comment would tell the reader why you are adding 1 to q->count.
6 Credit
These guidelines are adapted from Sean Davis’ guidelines for ECS 30, and the style guide of Texas A&M University
at http://faculty.cs.tamu.edu/welch/teaching/cstyle.html.
Version of October 6, 2015 at 7:54am Page 4 of 4
