CS代考 CS2106 L2 – AY2122 S1 ] – cscodehelp代写 – INTERVIEW&CODEHELP

Process Management
Process Abstraction

◼ Program execution:
❑ Hardware Context
❑ Memory Context
◼ Code & Data
◼ Function call
◼ Dynamically allocated memory
◼ Introduction to Process Management ❑ OS Context
◼ Process State
❑ Process Control Block and Process Table
◼ OS interaction with Process [ CS2106 L2 – AY2122 S1 ]

Recap: C Sample Program and Assembly Code
[ CS2106 L2 – AY2122 S1 ]
int i = 0; i = i + 20;
C Code Fragment
lw $1, 4096 addi $1, $0, 0 sw $1, 4096
lw $2, 4096 addi $3,$2,20 sw $3,4096
//Assume address of i = 4096 //register $1 = 0
//read i //$3=$2+20 //i=i+20
Corresponding MIPS-like Assembly Code

Recap: Program Execution (Memory)
lw $1, 4096 addi $1, $1, 0 sw $1, 4096 lw $2, 4096 addi $3, $2, 20 sw $3, 4096
“Free” Memory
[ CS2106 L2 – AY2122 S1 ]
(for instructions)
(for global variables)
The entire memory space

Recap: Generic Computer Organization Fetch Unit
Dispatch Unit
INT FP …… MEM
Functional Units
[ CS2106 L2 – AY2122 S1 ]
On CPU Chip
Off CPU Chip
Data Cache Instruction Cache

Recap: Component Description ◼ Memory:
❑ Storage for instruction and data
❑ Duplicate part of the memory for faster access
❑ Usually split into instruction cache and data cache
◼ Fetch unit:
❑ Loads instruction from memory
❑ Location indicated by a special register: Program Counter (PC)
[ CS2106 L2 – AY2122 S1 ]

Recap: Component Description (cont)
◼ Functional units:
❑ Carry out the instruction execution
❑ Dedicated to different instruction type
◼ Registers:
❑ Internal storage for the fastest access speed
❑ General Purpose Register (GPR):
◼ Accessible by user program (i.e. visible to compiler)
❑ Special Register:
◼ Program Counter (PC) ◼ Stack Pointer (SP)
◼ Frame Pointer (FP)
[ CS2106 L2 – AY2122 S1 ]

Recap: Basic Instruction Execution ◼ Instruction X is fetched
❑ Memory location indicated by Program Counter
◼ Instruction X dispatched to the corresponding Functional Unit
❑ Read operands if applicable ◼ Usually from memory or GPR
❑ Result computed
❑ Write value if applicable
◼ Usually to memory or GPR
◼ Instruction X is completed
❑ PC updated for the next instruction [ CS2106 L2 – AY2122 S1 ]

Recap: What you should know☺
◼ An executable (binary) consists of two major components:
❑ Instructions and Data
◼ When a program is under execution, there are more
information:
❑ Memory context:
◼ Text and Data, … ❑ Hardware context:
◼ General purpose registers, Program Counter, …
◼ Actually, there are other types of memory usage during
program execution ❑ Coming up next
[ CS2106 L2 – AY2122 S1 ]

Memory Context
Function Call
What if f() calls u() calls n()?

Function Call : Challenges VS
C Code Fragment
int g(int i, int j) {
return a; }
int i = 0; i = i + 20;
◼ Consider:
❑ How do we allocate memory space for variables i, j and a?
◼ Can we just make use of the “data” memory space?
❑ What are the key issues? [ CS2106 L2 – AY2122 S1 ]
C Code with Function

Function Call : Control Flow and Data
◼ f()callsg() ❑ f()isthecaller ❑ g()isthecallee
◼ ImportantSteps:
1. Setup the parameters
2. Transfer control to callee
3. Setup local variable
4. Store result if applicable
5. Return to caller
void f(int a, int b) {
c = g(a, b); ….
int g(int i, int j) {
return …; }
[ CS2106 L2 – AY2122 S1 ]

Function Call : Control Flow and Data
◼ Control Flow Issues:
❑ Need to jump to the function body
❑ Need to resume when the function call is done ➔ Minimally, need to store the PC of the caller
◼ Data Storage Issues:
❑ Need to pass parameters to the function ❑ Need to capture the return result
❑ May have local variables declaration
➔ Need a new region of memory that dynamically used by function invocations
[ CS2106 L2 – AY2122 S1 ]

Introducing Stack Memory ◼ Stack Memory Region:
❑ The new memory region to store information for function invocation ◼ Information of a function invocation is described by a stack
◼ Stack frame contains:
❑ Return address of the caller
❑ Arguments (Parameters) for the function
❑ Storage for local variables
❑ Other information…. (more later)
[ CS2106 L2 – AY2122 S1 ]

Stack Pointer
◼ The top of stack region (first unused location) is logically indicated by a Stack Pointer:
❑ Most CPU has a specialized register for this purpose
❑ Stack frame is added on top when a function is invoked
◼ Stack “grows”
❑ Stack frame is removed from top when a function call ends
◼ Stack “shrinks”
[ CS2106 L2 – AY2122 S1 ]

Illustration: Stack Memory
Stack growth direction
The entire memory space
(for instructions)
(for global variables)
[ CS2106 L2 – AY2122 S1 ]
Stack Pointer
(for function invocations)

Illustration: Stack Memory Usage (1 / 5)
void f() {
… g(); …
void g() {
void h() {
At this point
Stack Frame for f()
[ CS2106 L2 – AY2122 S1 ]

Illustration: Stack Memory Usage (2 / 5)
void f() {
… g(); …
void g() {
void h() {
At this point
Stack Frame
Stack Frame for f()
[ CS2106 L2 – AY2122 S1 ]

Illustration: Stack Memory Usage (3 / 5)
void f() {
… g(); …
void g() {
void h() {
At this point
Stack Frame
Stack Frame
Stack Frame for f()
[ CS2106 L2 – AY2122 S1 ]

Illustration: Stack Memory Usage (4 / 5)
void f() {
… g(); …
void g() {
void h() {
At this point
Stack Frame
Stack Frame for f()
[ CS2106 L2 – AY2122 S1 ]

Illustration: Stack Memory Usage (5 / 5)
void f() {
… g(); …
void g() {
void h() {
At this point
Stack Frame for f()
[ CS2106 L2 – AY2122 S1 ]

Illustration: Stack Frame v1.0
Free Memory
Stack Pointer
Local Variables
Parameters
Other info
Stack Frame for f()
After function f() calls g()
Topmost stack frame belongs to g()
Stack Frame
[ CS2106 L2 – AY2122 S1 ]

Function Call Convention
◼ Different ways to setup stack frame:
❑ Known as function call convention
❑ Main differences:
◼ What information is stored in stack frame vs. in registers? ◼ Which portion of stack frame is prepared by caller / callee? ◼ Which portion of stack fame is cleared by caller / callee?
◼ Who between caller / callee to adjust the stack pointer?
◼ No universal way
❑ Hardware and programming language dependent
◼ An example scheme is described next [ CS2106 L2 – AY2122 S1 ]

Stack Frame Setup
Local Variable
Parameters
◼ Prepare to make a function call:
❑ Caller: Pass parameters using registers and/or stack ❑ Caller: Save Return PC on stack
❑ Transfer Control from Caller to Callee
❑ Callee: Save the old Stack Pointer (SP)
❑ Callee: Allocate space for local variables of callee on stack ❑ Callee: Adjust SP to point to new stack top
[ CS2106 L2 – AY2122 S1 ]

Illustration: Calling function g()
void f(int a, int b) {
c = g(a, b); ….
int g(int i, int j) {
return a * 2; }
Parameters
local var “a”
Stack Frame for f()
[ CS2106 L2 – AY2122 S1 ]

Stack Frame Teardown
Local Variable
Parameters
◼ On returning from function call:
❑ Transfer control back to caller using saved PC
❑ Callee: Place return result in register (if applicable) ❑ Callee: Restore saved Stack Pointer
❑ Caller: Utilize return result (if applicable) ❑ Caller: Continues execution in caller
[ CS2106 L2 – AY2122 S1 ]

Illustration: Function g()finishes
void f(int a, int b) {
return result 1158 local var “a”
Parameters
Restored SP
c = g(a, b); ….
Execution resumes here
Stack Frame for f()
int g(int i, int j) {
return a * 2; }
[ CS2106 L2 – AY2122 S1 ]

Other Information in Stack Frame
◼ We have described the basic idea of: ❑ Stack frame
❑ Calling Convention: Setup and Teardown
◼ A few common additional information in the stack frame: ❑ Frame Pointer
❑ Saved Registers
[ CS2106 L2 – AY2122 S1 ]

Frame Pointer
◼ To facilitate the access of various stack frame items:
❑ Stack Pointer is hard to use as it can change
➔ Some processors provide a dedicated register Frame Pointer
◼ The frame pointer points to a fixed location in a stack frame ❑ Other items are accessed as a displacement from the frame pointer
◼ The usage of FP is platform dependent
[ CS2106 L2 – AY2122 S1 ]

Saved Registers
◼ The number of general purpose register (GPR) on most processors are very limited:
❑ E.g. MIPS has 32 GPRs, x86 has 16 GPRs
◼ When GPRs are exhausted:
❑ Use memory to temporary hold the GPR value ❑ That GPR can then be reused for other purpose ❑ The GPR value can be restored afterwards
❑ known as register spilling
◼ Similarly, a function can spill the registers it intend to use before the function starts (callee-saved)
❑ Restore those registers at the end of function [ CS2106 L2 – AY2122 S1 ]

Illustration: Stack Frame v2.0
Free Memory
Stack Pointer
Frame Pointer
Local Variables
Parameters
Saved Registers
Stack Frame for f()
Stack Frame for g()
After function f() calls g()
Topmost stack frame belongs to g()
[ CS2106 L2 – AY2122 S1 ]

Stack Frame Setup / Teardown [Updated]
◼ On executing function call:
❑ Transfer control from caller to callee
❑ Caller: Pass arguments with registers and/or stack ❑ Caller: Save Return PC on stack
❑ Callee: Save registers used by callee. Save old FP, SP
❑ Callee: Allocate space for local variables of callee on stack ❑ Callee: Adjust SP to point to new stack top
◼ On returning from function call:
❑ Callee: Restore saved registers, FP, SP
❑ Transfer control from callee to caller using saved PC ❑ Caller: Continues execution in caller
◼ Remember, just an example! [ CS2106 L2 – AY2122 S1 ]

Function Call Summary
◼ In this part, we learned:
❑ Another portion of memory space is used as a Stack Memory
❑ Stack Memory stores the executing function using Stack Frame ◼ Typical information stored on a stack frame
◼ Typical scheme of setting up and tearing down a stack frame
❑ The usage of Stack Pointer and Frame Pointer
[ CS2106 L2 – AY2122 S1 ]

Memory Context
Dynamically Allocated Memory
Hmm… I need more memory

Dynamically Allocated Memory
◼ Most programming languages allow dynamically allocated memory:
❑ i.e. acquire memory space during execution time
◼ Examples:
❑ In C, the malloc() function call ❑ In C++, the new keyword
❑ In Java, the new keyword
◼ Question:
❑ Can we use the existing “Data” or “Stack” memory regions? [ CS2106 L2 – AY2122 S1 ]

Dynamically Allocated Memory
◼ Observations:
❑ These memory blocks have different behaviors:
1. Allocated only at runtime, i.e. size is not known during compilation time➔Cannot place in Data region
2. No definite deallocation timing, e.g. can be explicitly freed by programmer in C/C++, can be implicitly freed by garbage collector in Java➔Cannot place in Stack region
◼ Solution:
❑ Setup a separate heap memory region
[ CS2106 L2 – AY2122 S1 ]

Illustration for Heap Memory
The entire memory space
(for instructions)
(for global variables)
(for dynamic allocation)
[ CS2106 L2 – AY2122 S1 ]
(for function invocations)

Managing Heap Memory
◼ Heap memory is a lot trickier to manage due to its nature: ❑ Variable size
❑ Variable allocation / deallocation timing
◼ You can easily construct a scenario where heap memory are allocated /deallocated in such a way to create “holes” in the memory
❑ Free memory block squeezed in between of occupied memory block ◼ We will learn more in the memory management (much) later
in the course
[ CS2106 L2 – AY2122 S1 ]

Checkpoint: Contexts updated
◼ Information describing a program execution:
❑ Memory context:
◼ Text, Data, Stack and Heap
❑ Hardware context:
◼ General purpose registers, Program Counter, Stack pointer, Stack frame
pointer, ….
[ CS2106 L2 – AY2122 S1 ]

Recap: Efficient Hardware Utilization
◼ OS should provide efficient use of the hardware resource:
❑ By managing the programs executing on the hardware ◼ Observation:
❑ If there is only one program executing at any point in time, how can we utilize hardware resources effectively?
◼ Batch processing?
◼ Solution:
❑ Allow multiple programs to share the hardware
◼ e.g. Multiprogramming, Time-sharing
[ CS2106 L2 – AY2122 S1 ]

Introduction to Process Management
◼ As the OS, to be able to switch from running program A to program B requires:
1. Information regarding the execution of program A needs to be stored
2. Program A’s information is replaced with the information required to run program B
◼ Hence, we need:
❑ An abstraction to describe a running program ❑ aka process
[ CS2106 L2 – AY2122 S1 ]

Key Topics
Process Abstraction
• Information describing an executing program
Process Scheduling
• Deciding which process get to execute
Inter-Process Communication &
Synchronization
• Passing information between processes
[ CS2106 L2 – AY2122 S1 ]
Alternative to Process
• Light-weight process aka Thread

Process Abstraction
◼ (Process / Task / Job) is a dynamic abstraction for executing program
❑ information required to describe a running program
Memory Context
• Code • Data • Stack • Heap
Hardware Context
• Registers
• Stack pointer
• Stack frame pointer
OS Context
• Process Properties
• Resources used
[ CS2106 L2 – AY2122 S1 ]

OS Context
Process Id & Process State
Your ID? Give me a status report!

Process Identification
◼ To distinguish processes from each other
❑ Common approach is to use process ID (PID)
◼ Just a number
❑ Unique among processes
◼ There are a couple of OS dependent issues: ❑ Are PIDs reused?
❑ Does it limit the maximum no. of processes?
❑ Are there reserved PIDs?
[ CS2106 L2 – AY2122 S1 ]

Introducing Process State
◼ In the multitasking scenario:
❑ A process can be:
◼ Running OR
◼ Not-running, e.g., another process running
◼ A process can be ready to run
❑ But not actually executing
❑ E.g., waiting for its turn to use the CPU
◼ Hence, each process should have a process state:
❑ As an indication of the execution status [ CS2106 L2 – AY2122 S1 ]

(Simple) Process Model State Diagram
Context switch
process waiting to run
Ready State
Running State:
process is executing
◼ The set of states and transitions are known as process model
❑ Describes the behaviors of a process [ CS2106 L2 – AY2122 S1 ]
Context switch

Generic 5-State Process Model
admit create
event occurs
Notes: generic process states, details vary in actual OS
Terminated
switch: scheduled
switch: release CPU
event wait
[ CS2106 L2 – AY2122 S1 ]

Process States for 5-Stage Model
❑ New process created
❑ May still be under initialization➔not yet ready
❑ process is waiting to run
◼ Running:
❑ Process being executed on CPU
◼ Blocked:
❑ Process waiting (sleeping) for event
❑ Cannot execute until event is available
◼ Terminated:
❑ Process has finished execution, may require OS cleanup
[ CS2106 L2 – AY2122 S1 ]

Process State Transitions in 5-Stage Model
Create (nil → New):
❑ New process is created
Admit (New → Ready):
❑ Process ready to be scheduled for running
Switch (Ready → Running): ❑ Process selected to run
Switch (Running → Ready):
❑ Process gives up CPU voluntarily or preempted by scheduler
[ CS2106 L2 – AY2122 S1 ]

Process State Transitions
❑ Example events:
◼ Acquiring lock, waiting for I/O, (more later)
wait (Running → Blocked):
❑ Process requests event/resource/service which is not available/in
occurs (Blocked → Ready): ❑ Event occurs➔process can continue
[ CS2106 L2 – AY2122 S1 ]

Global View of Process States
◼ Given n processes:
❑ With 1 CPU (core):
◼  1 process in running state
◼ conceptually 1 transition at a time
❑ With m CPUs (cores):
◼  m process in running state ◼ possibly parallel transitions
◼ Different processes may be in different states
❑ each process may be in different part of its state diagram
◼ Assumption in CS2106: Our CPU has 1 core! [ CS2106 L2 – AY2122 S1 ]

Queuing Model of 5 state transition
ready queue
by scheduler
Running Process
[ CS2106 L2 – AY2122 S1 ]
blocked queue
•More than 1 process can be in ready + blocked queues
•May have separate event queues
•Queuing model gives global view of the processes, i.e. how the OS views them
event wait

Checkpoint: Contexts updated
◼ When a program is under execution, there are more
information:
❑ Memory context:
◼ Text and Data, Stack and Heap ❑ Hardware context:
◼ General purpose registers, Program Counter, Stack pointer, Stack frame pointer, …
❑ OS context:
◼ Process ID, Process State, …
[ CS2106 L2 – AY2122 S1 ]

Process Table &
Process Control Block
Putting it together

Process Control Block & Table
◼ The entire execution context for a process
❑ Traditionally called Process Control Block (PCB) or Process Table Entry
◼ Kernel maintains PCB for all processes
❑ Conceptually stored as one table representing all processes
Interesting Issues: ◼ Scalability
❑ How many concurrent processes can you have? ◼ Efficiency
❑ Should provide efficient access with minimum space wastage [ CS2106 L2 – AY2122 S1 ]

Illustration of a Process Table
PC, FP, SP, ……
Memory Region Info
Process Table
Process Control Block
Memory Space of a Process
[ CS2106 L2 – AY2122 S1 ]

Process interaction with OS
System Calls
Can you please do this for me?

System Calls
◼ Application Program Interface (API) to OS
❑ Provides way of calling facilities/services in kernel
❑ NOT the same as normal function call
◼ have to change from user mode to kernel mode
◼ Different OS have different APIs:
❑ Unix Variants:
◼ Most follows POSIX standards ◼ Small number of calls: ~100
❑ Windows Family:
◼ Uses Win API across different Windows versions ◼ New version of windows usually adds more calls
◼ Huge number of calls:~1000 [ CS2106 L2 – AY2122 S1 ]

Unix System Calls in C/C++ program
◼ In C/C++ program, system call can be invoked almost directly
❑ Majority of the system calls have a library version with the same name and the same parameters
◼ The library version act as a function wrapper
❑ Other than that, a few library functions present a more user friendly version to the programmer
◼ E.g. lesser number of parameters, more flexible parameter values etc
◼ The library version acts as a function adapter
[ CS2106 L2 – AY2122 S1 ]

#include
#include
int main() {
/* get Process ID */
pid = getpid();
printf(“process id = %d
”, pid);
return 0; }
[ CS2106 L2 – AY2122 S1 ]
◼ System Calls invoked in this example:
❑ getpid()
❑ write() – made by printf() library call
Library call that has the same name as a system call
Library call that make a system call

General System Call Mechanism
User program invokes the library call
Using the normal function call mechanism as discussed
Library call (usually in assembly code) places the system call number

CS代考 CS2106 L2 – AY2122 S1 ] – cscodehelp代写

Published by admin

Leave a Reply Cancel reply