CS代考计算机代写 compiler Haskell Haskell

Haskell
This assignment provides experience in Haskell programming. Please compile and run your code on command line using Haskell GHC compiler. You may download GHC at https://www.haskell.org/platform/.
Turning in your assignment
The problem solution will consist of a sequence of function definitions and unit tests for those functions. You will write all your functions in the attached HW1.hs file. You can edit this file and write code using any source code editor (Notepad++, Sublime, Visual Studio Code, etc.). We recommend you to use Visual Studio Code, since it has better support for Haskell.
In addition, you will write unit tests using HUnit testing package. Attached file, HW1SampleTests.hs, includes 2 to 4 sample unit tests for each problem. You will edit this file and provide additional tests (add at least 2 tests per problem). Please rename your test file as HW1Tests.hs.
Important rules
• Unless directed otherwise, you must implement your functions using recursive definitions built up from the basic built-in functions. (You are not allowed to import an external library and use functions from there.)
• The type of your functions should be compatible with the type specified in each problem. You don’t need to include the “type signatures” for your functions.
• Make sure that your function names match the function names specified in the assignment specification. Also, make sure that your functions work with the given tests. However, the given test inputs don’t cover all boundary cases. You should generate other test cases covering the
extremes of the input domain, e.g. maximum, minimum, just inside/outside boundaries, typical
values, and error values.
• When auxiliary functions are needed, make them local functions (inside a let..in or where
block). In this homework you will lose points if you don’t define the helper functions inside a
let..in or where block.
• Be careful about the indentation. The major rule is “code which is part of some statement
should be indented further in than the beginning of that expression”. Also, “if a block has multiple statements, all those statements should have the same indentation”. Refer to the following link for more information: https://en.wikibooks.org/wiki/Haskell/Indentation
• The assignment will be marked for good programming style (indentation and appropriate
comments), as well as clean compilation and correct execution. Haskell comments are placed
inside properly nested sets of opening/closing comment delimiters:
{- multi line
comment-}.
Line comments are preceded by double dash, e.g., — line comment

Problems
1. getUniqueRight and getUniqueLeft – 20%
a) [10pts] Define a recursive function getUniqueRight which takes a list as input and it returns the unique values from the list. Your function should keep the last (i.e., rightmost) copies of the duplicate elements in the result. It should not sort the elements in the input list. You may use the elem function in your implementation.
The type of the getUniqueRight function should be compatible with the following: getUniqueRight:: Eq a => [a] -> [a]
Examples:
> getUniqueRight [6,5,1,6,4,2,2,3,7,2,1,1,2,3,4,5,6,7] [1,2,3,4,5,6,7]
> getUniqueRight “CptS322 – CptS322 – CptS 321” “-CptS 321”
> getUniqueRight [[1,2],[1],[],[3],[1],[]] [[1,2],[3],[1],[]]
> getUniqueRight [(‘a’,1),(‘a’,2),(‘b’,1),(‘a’,2),(‘c’,1),(‘b’,1),(‘a’,2)] [(‘a’,1),(‘c’,1),(‘b’,1),(‘a’,2)]
> getUniqueRight [“Let”,”it”,”snow”,”let”,”it”,”rain”,”let”,”it”,”hail”] [“Let”,”snow”,”rain”,”let”,”it”,”hail”]
b) [10pts] Re-write your getUniqueRight function so that it keeps the first (i.e., leftmost) copies of the duplicate values in the output instead of the last ones. Name your function getUniqueLeft. Your solution should not sort the elements in the input list. You may use the elem function in your implementation.
The type of the getUniqueLeft function should be compatible with the following: getUniqueLeft:: Eq a => [a] -> [a]
Examples:
> getUniqueLeft [6,5,1,6,4,2,2,3,7,2,1,1,2,3,4,5,6,7] [6,5,1,4,2,3,7]
> getUniqueLeft “CptS322 – CptS322 – CptS 321” “CptS32 -1”
> getUniqueLeft [[1,2],[1],[],[3],[1],[]] [[1,2],[1],[],[3]]
> getUniqueLeft [(‘a’,1),(‘a’,2),(‘b’,1),(‘a’,2),(‘c’,1),(‘b’,1),(‘a’,2)] [(‘a’,1),(‘a’,2),(‘b’,1),(‘c’,1)]
> getUniqueLeft [“Let”,”it”,”snow”,”let”,”it”,”rain”,”let”,”it”,”hail”] [“Let”,”it”,”snow”,”let”,”rain”,”hail”]

2.cansInLog and numCans and getMonths – 40%
Assume your cat gained a lot of weight since the beginning of the pandemic. Your veterinarian recommended you keep track of the number of cat food cans you feed to your pet every month. In addition, they recommended you balance their diet and avoid giving the same types of flavors. So, you start recording how many cans you feed to your cat in a Haskell list. This list logs the number of cans your cat consumed during that month for each flavor.
a) (10 pts) First consider the food you give to your cat during a single month, for example:
feedinglog =[(“Oceanfish”,7),(“Tuna”,1),(“Whitefish”,3),(“Chicken”,4),(“Beef”,2)] feedinglog is a list of (flavor, number of cans) pairs.
cansInLog :: Num p => [(a, p)] -> p
Examples:
> cansInLog [(“Oceanfish”,7),(“Tuna”,1),(“Whitefish”,3),(“Chicken”,4),(“Beef”,2)] 17
19
b) (15 pts) Now we combine the feeding logs for all months into one single list. An example list is given below:
Write a function cansInLog that takes a month’s feeding log as input and returns the total number of cans consumed. The type for countInLog should be compatible with the following:
> cansInLog [(“Oceanfish”,3),(“Tuna”,2),(“Whitefish”,2),(“Salmon”,2),(“Chicken”,4),
(“Beef”,2),(“Turkey”,1),(“Sardines”,3)]
myCatsLog=[((7,2020),[(“Oceanfish”,7),(“Tuna”,1),(“Whitefish”,3),(“Chicken”,4),(“Beef”,2)]),
((8,2020),[(“Oceanfish”,6),(“Tuna”,2),(“Whitefish”,1),(“Salmon”,3),(“Chicken”,6)]),
((9,2020),[(“Tuna”,3),(“Whitefish”,3),(“Salmon”,2),(“Chicken”,5),(“Beef”,2),(“Turkey”,1),(“Sardines”,1)]),
((10,2020),[(“Whitefish”,5),(“Sardines”,3),(“Chicken”,7),(“Beef”,3)]),
((11,2020),[(“Oceanfish”,3),(“Tuna”,2),(“Whitefish”,2),(“Salmon”,2),(“Chicken”,4),(“Beef”,2),(“Turkey”,1)]),
((12,2020),[(“Tuna”,2),(“Whitefish”,2),(“Salmon”,2),(“Chicken”,4),(“Beef”,2),(“Turkey”,4),(“Sardines”,1)]),
((1,2021),[(“Chicken”,7),(“Beef”,3),(“Turkey”,4),(“Whitefish”,1),(“Sardines”,2)]) ]
The list includes tuples where the first value in each tuple is the timestamp representing a month and the second value is the feeding log for that month. The timestamp itself is a tuple including the month and year. For example (8,2020) represents August 2020.
The type of numCans should be compatible with the following:
numCans :: (Num p, Eq t) => [((a1, t), [(a2, p)])] -> t -> p
Examples:
> numCans myCatsLog 2020 103
> numCans myCatsLog 2021 17
Write a function, numCans, that takes your cat’s food log (similar to the above) and a year value (for example 2020) and returns the total number of cans that your cat consumed in that year.
(Hint: You can make use of cansInLog function you defined in part-a.)

b) (15 pts) You would like to make sure that your cat’s diet includes a balanced portion of fish, poultry and meat. So, you should check what months you fed your cat more than a certain number of cans of a certain flavor.
The type of getMonths should be compatible with the following: getMonths :: (Ord t1, Eq t2) =>
[((a, b), [(t2, t1)])] -> t1 -> t2 -> [(a, b)]
Examples:
[(8,2020),(10,2020),(1,2021)]
3.deepCount – 15%
The type of deepCount should be compatible with the following:
deepCount :: (Num p, Eq t) => t -> [[t]] -> p
Examples:
0
4. clusterConsequtive – 25%
The type of clusterConsecutive should be compatible with the following:
clusterConsecutive :: (Eq a, Num a) => [a] -> [[a]]
Examples:
Write a function called getMonths that takes a copy of your cat’s food log (similar to the above), a
number “n”, and a cat food flavor (e.g., “chicken, “oceanfish”, etc.) and returns the list of months whose
feeding logs include more than “n” cans of the given flavor.
> getMonths myCatsLog 4 “Oceanfish” [(7,2020),(8,2020)]
> getMonths myCatsLog 5 “Chicken”
Write a function deepCount that takes a value “v” and a nested list (i.e., list of lists) and returns the
number of occurrences of “v” in the nested list.
> deepCount 5
> deepCount [“h”,”a”]] 3
> deepCount 0
> deepCount
5 [[1,2,3],[5,5],[4,5,6],[7,1,2,3,4,5],[5,6]]
“a” [[“a”,”b”,”c”],[“b”,”c”],[“b”,”e”,”g”],[“a”,”h”,”c”,”d”],[“d”],[],
10 [[1,2,3],[1,2],[4,5,6],[7,1,2,3,4,5],[1],[], [5,6]] 1 []
Write a function clusterConsecutive that takes a list of numbers as input and it splits the input list
into groups of numbers (sublists) where each group includes increasingly consecutive numbers. The split
points will be when the adjacent elements are not consecutive or when the numbers decrease.
> clusterConsecutive [1,2,3,5,6,7,8,9,2,3,11,12] [[1,2,3],[5,6,7,8,9],[2,3],[11,12]]
> clusterConsecutive [1,3,5,7,8,10,13]

[[1],[3],[5],[7,8],[10],[13]]
> clusterConsecutive [1] [[1]]
> clusterConsecutive [2,1] [[2],[1]]
> clusterConsecutive [] []
(5%) Testing your functions Install HUnit
WewillbeusingtheHUnitunittestingpackage See http://hackage.haskell.org/package/HUnit for additional documentation.
To install HUnit using cabal installer, run the following commands on the terminal (command line). Check the attached HUnit_HowtoInstall.pdf document for other options to install HUnit.
Running Tests
The file HW1SampleTests.hs provides 2 to 4 sample test cases comparing the actual output with the expected (correct) output for each problem. This file imports the HW1 module (HW1.hs file) which will include your implementations of the given problems.
You are expected to add at least 2 more test cases for each problem. Make sure that your test inputs cover all boundary cases.
In HUnit, you can define a new test case using the TestCase function and the list TestList includes the list of all test that will be run in the test suite. So, make sure to add your new test cases to the TestList list. All tests in TestList will be run through the “runTestTT tests” command. The instructor will further explain this during the lecture.
If you don’t add new test cases you will be deduced at least 5% in this homework.
$ cabal update
$ cabal v1-install HUnit